5 8464

How to have right root on zp720

Roby_Bra 2015-10-20 14:46 Published [Users sharing] [Copy link]

Welcome to login zopo forum!

You have to Login for download or view attachment(s). No Account? Register

How to have right root on zp720

This procedure is to receive right root on STOCK official firmware

Remember after received the right root is not possible to apply the update of new firmwares.

Report Use magic
| Reply

5 comments about How to have right root on zp720 Last comment 2015-11-12 15:10

Roby_Bra Moderator Post time 2015-10-20 14:47:09 | Show all posts
Edited by Roby_Bra at 2015-10-24 14:37

Software section:

New Firmware
KK Zp720 4.4.4.  150203

Recovery Modded

Carliv CWM 920 ported for zp720 by Ghost45

Flashtool V.5.1444
Version ONLY for Mtk 67xx

Report Use magic
Roby_Bra Moderator Post time 2015-10-20 14:50:24 | Show all posts
Edited by Roby_Bra at 2015-10-24 14:42

Section setup Software:

Drivers Installation :

Procedure :

To install the USB drivers VCOM the phone must be turned off and connected to the PC with or without a battery depending on the type of device,
get a screen like this in the device manager of the computer


   Once you have installed the terminal will be shown in this way (the COM port may be different)

For those who have problems with the installation of these drivers and have had in the past a terminal mtk
they may have a driver conflict, or even if you just do the confusion and installed it different,
to solve, you can try to use the program


  select all items in that report as VCOM USB Preloader in the Mediatek figure right click Unistall and restart the PC.

Installation of the Firmware:


1) Setup new Firmware  

To download the new firmware.

Unzip the compressed file and insert into the firmware folder:

a) recovery modded (is necessary for receive right root)

Phone off without usb cable and possibly removed the battery and put back for a perfect reset .....
and hold mode 'of off without usb cable connected!

Run Flashtool version octa-core ..... select the file, and then scatter firmware upgrade ...... NOW ONLY CONNECT USB CABLE not before!
Wait for the end of the installation procedure of the firmware and eventually restart the phone!

This' whole simplified procedure for installing the original firmware.
Report Use magic
Roby_Bra Moderator Post time 2015-10-20 14:51:54 | Show all posts
Edited by Roby_Bra at 2015-10-24 14:44

Root Section

1) Download the SuperSu App from the Xda Web SIte

Copy it to your SD card .

2) Go into recovery modded

Select SuperSu v.xx and install

Reboot into android S.O.
You should see the app  installed Super Su.

3) Install Busybox (from files or from GooglePlay store)
open the app and give the right Su power and wait for it's scan

4) Install the binary from the Busybox menu' "normal install"

After correctly installed the binary ...Reboot the phone

And you will have your rights as a Root

Many Thanks to:
Zopo Forum, Zopomobileshop.com,  Zopomobile.it
All My Friends from other web site and forums
Carliv,Yuweng, Codelover,Bigrammy,SevenMax, Marsapa, PaoloTHL, Command0, M3N3chm0,Biobio,ICEMAN,Mrjavum,Jessica, Feng, Xiaoyi,Tao. Jaynes,
I apologize in advance if not list them all!

Report Use magic
Amaryllis Newbie Post time 2015-11-7 11:48:49 | Show all posts
good! thank you Roby!
Report Use magic
Elodie Newbie Post time 2015-11-12 15:10:56 | Show all posts
Good! Thank you Roby!
Report Use magic
You have to log in before you can reply Login | Register now

Points Rules

  • Reply
  • Comment
  • Score
  • Share
ZOPO Mobile Forum - ZOPO OfficialX

Zopo Speed X with Dual Rear Camera and Android Nougat Launched!

Now zopo is adding an all-new top flagship to its high-end speed series –The Speed X...

Check it 
Quick Reply To Top Return to the list